Fit the foot rails Cont...
( )
Place the assembled Foot Rails onto the vehicle's roof, lining up the mounting holes in the bottom of the
E
Foot Rails with the mounting points on the vehicle. Depending on the vehicle specifications, you will ei-
ther use mounting point number 1 or 2 as indicated by the arrows for the front of the vehicle. The remain-
ing mounting point will rest on the rubber ditch moulding.
The Product Sticker must go to the rear of the vehicle and must be facing outwards. Push the Foot Rails
as far back as possible.
( )
Secure the Foot Rails to the vehicle using the M8 x 40 Hex Bolts, M8 Spring Washer and M8 Flat Washers
F
(Items 2, 3, 4). Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.
FIT THE RACK
Note: If your Slimline II Tray is not already assembled, assemble it as per the Slimline II Tray Universal As-
sembly Instruction (Document RRSTUNI). Read Step 3A before fitting the Wind Deflector
FATL002 / KRTL029T_REV_A02
4