Installation Of An Add-On Card - Sharkoon Nightfall U3 Manual

5. Connect the 3.5" device to the power supply and the mainboard.
6. Screw the 5.25" bezel with 3.5" opening into the front panel (fig. 20) and place it back onto
the case.
(5.25" bezel with 3.5" opening)
fig. 20

9. Installation of an add-on card

1. Remove the slot bezel's fixation screw and take away the slot bezel (fig. 21).
fig. 21
NIGHTFALL U3
14
