3. Dismantle the 5.25" front bezel from the mounting bay in which you intend to install the
drive by loosening its screws and pushing the bezel to the inside (fig. 11). Remove the quick
fasteners (fig. 12).
fig. 11
(Carefully take out an optionally present metal bezel covering the 3.5" drive bay by using a
gripper.)
4. Slide the optical drive into the case's drive bay (fig. 13).
fig. 13
5. Attach the optical device from both sides using the quick fasteners (fig. 14).
fig. 14
6. Connect the optical drive to the power supply and the mainboard. (Put the front bezel back
onto the case.)
fig. 12
Note:
If you intend to transport the case we recommend
securing (additionally) the installed drives:
(Screws for 5.25" drive mounting)
NIGHTFALL U3
12