Ensure adequate workplace ventilation. Do not eat, drink, or
smoke in the work area.
Risk of explosion
Accumulated fine dust may ignite and cause fire. Keep the
work area clean and free from dust. Dust collection and vacuum
extraction systems should be regularly and thoroughly cleaned.
When sanding metal, hot sparks may be produced.
Noise and Vibration
Wear ear protection when operating the product. Do not operate
the product for extended periods of time.
See "Risk reduction".
It has been reported that vibrations from handheld tools may
contribute to a condition called Raynaud's Syndrome in certain
individuals. Symptoms may include tingling, numbness and blanching
of the fingers, usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking and work
practices are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
Keep your body warm in cold weather. When operating the unit
wear gloves to keep the hands and wrists warm. It is reported
that cold weather is a major factor contributing to Raynaud's
After each period of operation, exercise to increase blood
Take frequent work breaks. Limit the amount of exposure per day.
If you experience any of the symptoms of this condition, immediately
discontinue use and see your doctor about these symptoms.
WARNING! Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods, ensure you
take regular breaks.
SpEcIfIED coNDITIoNS of USE
This random orbital sander is a versatile machine. The following work
can be carried out with it: coarse sanding and grinding, fine sanding
and polishing, rubbing down weather-beaten paint, polishing up
scratches on acrylic glass, etc.
To provide the best adhesion, it is recommended that you clean the
backing pad and the sanding disc backing occasionally by brushing
them lightly with a small brush.
Do not use the product in any other way as stated for normal use.
Connect only to single-phase AC current and only to the system
voltage indicated on the rating plate. It is also possible to conned to
sockets without an earthing contact as the design conforms to safety
ADvIcE foR opERATIoN
Only use original AEG sanding and polishing tools with self-adhesive
If the power supply cord is damaged, it must be replaced only by the
manufacturer or by an authorised service centre to avoid a safety
hazard. Contact authorised service centre.
The ventilation slots of the machine must be kept clear at all times.
Use only AEG accessories and spare parts. Should components need
to be replaced which have not been described, please contact one of
our AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label and
order the drawing at your local service agents or directly at:
Techtronic Industries (Australia) pty. ltd.
PO Box 1065
Mount Waverley VIC 3149
Tel. no. 1300 234 797
Techtronic Industries N.Z. ltd.
PO Box 12-806
Penrose AUCKLAND 1642
Tel. no. 0800 234 797
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before
carrying out any work on the product.
Please read the instructions carefully before starting
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility. Check with your local
authority or retailer for recycling advice and collection
Class II tool, tool in which protection against electric
shock does not rely on basic insulation only, but in
which additional safety precautions, such as double
insulation or reinforced insulation, are provided.
There being no provision for protective earthing or
reliance upon installation conditions.
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.