Advertisement
MCU Recovery from Interrupted Firmware
Update Procedure
If instructed to do so by Lectrosonics Customer Sup-
port, the firmware in a non-functioning unit can be
restored.
Launch the Control Panel program. After the panel
opens, click on Connect->Update Firmware...
In the lower part of the screen is a check box that is
used only for the recovery process. When the box is
checked, the instructions will change to describe the
recovery procedure.
Follow the on-screen prompts to return the unit to nor-
mal operation.
Rio Rancho, NM
Recovery check box
Installation and Startup Guide
15
Advertisement
Need help?
Do you have a question about the SPNCWB and is the answer not in the manual?