Selecting A Stereo Or Bilingual Program - Sony TRINITRON KV-T29SN81 Service Manual

Selecting a stereo or
bilingual program
Press A/B/ENLARGE repeatedly until you
receive the sound you want.
The on-screen display changes corresponding to the
selected sound and the WAKE UP/STEREO indicator
also lights up.
A/B
ENLARGE
When receiving a NICAM program
On-screen display
Broadcasting
(Selected sound)
NICAM stereo NICAM NICAM
z(Stereo sound) z MONO
(Regular sound)
NICAM bilingual NICAM
NICAM NICAM
z MAIN z SUB z MONO
(Main sound) (Sub sound) (Regular
sound)
NICAM monaural NICAM NICAM
MAIN MONO
z z
(Main sound) (Regular sound)
When receiving a A2 (German) program
On-screen display
Broadcasting
(Selected sound)
A2 (German) stereo
STEREO
(Stereo sound)
A2 (German) STEREO STEREO
MAIN SUB
z z
bilingual
(Main sound) (Sub sound)
10
Operations
Receiving area for NICAM and A2 (German)
programs
System Receiving area
NICAM Hong Kong, Singapore, New Zealand,
etc.
Australia, Malaysia, Thailand, etc.
A2 (German)
Notes
If the signal is very weak, the sound becomes monaural
automatically.
If the stereo sound is noisy, select "regular sound." The sound
becomes monaural, however, the noise will be reduced.
Viewing Teletext
DISPLAY/REVEAL
VIDEO/HOLD
TEXT TV
Number
TEXT CLR
FASTEXT
A/B/ENLARGE
WAKE UP/INDEX
PROGR +/–
Displaying Teletext
1
Select a TV channel which carries the Teletext
broadcast you want to watch.
2
Press TEXT to display the Teletext.
A Teletext page is displayed (normally the index
page). If there is no Teletext broadcast, 100 is
displayed at the top left corner of the screen.
To cancel the Teletext display, press TV.
Superimposing a Teletext page on the TV
picture
Press TEXT.
Each time you press TEXT, the screen changes as
follows:
z Teletext z Teletext and TV z TV
Checking the contents of a Teletext service
(INDEX)
Press WAKE UP/INDEX to display an overview of the
Teletext contents and page numbers.
Using FASTEXT
This feature allows you to quickly access a Teletext
page that uses FASTEXT. When a FASTEXT page is
broadcasted, a color-coded menu appears at the bottom
of the screen. The colors of the menu correspond to the
RED, GREEN, YELLOW, and CYAN buttons on the
remote commander.
Press the color button which corresponds to the color-
coded menu.
The page is displayed after a few seconds.
Selecting a Teletext page
To input the three-digit page number of the Teletext
page, press the number buttons.
If you make a mistake, key in the correct page number
again.
To access the next or previous page, press PROGR +/–.
Holding a Teletext page (subpage)
Press VIDEO/HOLD.
The HOLD symbol "j" is displayed at the top left
corner of the screen.
To resume normal Teletext operation, press VIDEO/
HOLD again or TEXT.
Revealing concealed information
Press DISPLAY/REVEAL.
To conceal the information, press DISPLAY/REVEAL
again.
Enlarging the Teletext display
Press A/B/ENLARGE.
Each time you press A/B/ENLARGE, the Teletext
display changes as follows:
Enlarge Enlarge
z z z Normal size
upper half lower half
Waiting for a Teletext page while watching a
TV program (TEXT CLEAR)
1
Key in the page number of the Teletext that you
want to refer, then press TEXT CLR.
2
When the page number is displayed on the screen,
press TEXT to switch the Teletext on.
11
Operations