Important safety and environmental
1
instructions
This section contains safety in-
structions that will help protect
from risk of personal injury or pro-
perty damage. Failure to follow
these instructions invalidates the
granted warranty.
1.1 General safety
Always have the installation and
•
repairing procedures carried out
by the Authorised Service Agent.
Manufacturing firm shall not be
held responsible for damages that
may be caused by unauthorised
persons.
This appliance is not intended for
•
use by persons (including chil-
dren) with reduced physical, sen-
sory or mental capabilities, or lack
of experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.
Electrical safety
1.1.1
Always unplug the appliance from
•
the mains supply during installa-
tion, maintenance, cleaning and
repair operations.
4 / EN
If the power cable is faulty, it sho-
•
uld be replaced by a qualified per-
son certified by the manufacturer,
after-sales service or similar (pre-
ferably an electrician) or a person
described by the importer.
Operating voltage is 220 to 240
•
volts.
If the appliance has a failure, it
•
should not be operated unless it is
repaired by the Authorised Service
Agent. There is the risk of electric
shock!
Do not route power cable close
•
to hobs. Otherwise power cable
may cause fire since it melts down
easily.
Never plug the hood before instal-
•
lation is completed.
In order to obtain the best perfor-
•
mance, external conductor must
not be longer than 4 m. It must not
contain more than 2 perpendicular
(90°) angles and its diameter must
be min. Ø120 mm.
Disconnect the appliance from
•
mains before any intervention to
the internal parts of the appliance.
Use the appliance with a groun-
•
ded outlet only.
Hood / User Manual