Additional Information 25; Connecting Other Equipment To The Tv - Sony FD Trinitron WEGA KV-32FQ80 Operating Instructions Manual

32FQ80 B5 Part 7.fm Page 25 Tuesday, May 28, 2002 2:41 PM

Connecting other equipment to the TV

The following illustration explains how to connect a wide range of audio and video equipment to the rear of the TV.
PlayStation/PSOne/PlayStation 2
VCR
DVD
Decoder
1.
2.
3.
4.
Connecting a Smartlink VCR
Smartlink is a direct link between the TV and VCR. For more information on Smartlink, please
refer to your VCR instruction manual. Ensure that your Smartlink VCR is connected to the C
socket, using a fully-wired 21 pin Scart lead.
Connecting external audio equipment
Connect your Hi-Fi system to the E sockets on the rear of the TV. Use the ' /Audio-out Vol.'
option in the 'Sound Adjustment' menu to adjust the volume level.
4
(SMARTLINK)
3
VCR
2
DVD
1
ANALOGUE
R/D/D/D L/G/S/I
DOLBY. THE DOUBLE-D SYMBOL D
ARE TRADEMARKS OF DOLBY
LABORATORIES
Hi-Fi
Connect your equipment as shown in the above illustration.
Press the / button on the remote control until the correct symbol for your
equipment appears on the TV screen (see table below).
On Screen Symbol
1
2
3
4
Switch on the connected equipment. The picture (if any) from this equipment appears
on the TV screen.
Press the button to return to normal TV operation.
s 4
s 3
D
E
Notes: Connecting cables are not supplied.
PlayStation 2 used for illustration purposes
Input Signals
For equipment connected to socket A.
For equipment connected to socket B.
For equipment connected to socket C.
For equipment connected to socket D.

Additional Information 25

D
C
B
A