Related Manuals for enervent Pinion
Summary of Contents for enervent Pinion
- Page 1 19 October 2017 Enervent Pinion Ventilation unit operation and maintenance instructions...
- Page 2 Copyright © Enervent 2017. Unauthorised copying and distribution is forbidden.
-
Page 3: Table Of Contents
Contents READ FIRST ....................... . 4 PURPOSE OF USE . -
Page 4: Read First
This instruction manual is intended for all users of the The purpose of the unit is to improve the quality of indoor Enervent ventilation units. Only qualified persons may air and its primary function is ventilation. install the equipment described in this manual, according The unit is also used for the recovery of heat energy from to the manufacturer’s instructions and the local laws... -
Page 5: Safety
SRJ. NRO/SERIAL NO: Wait for two (2) minutes after switching off the unit power before you commence with the IP 20 www.enervent.com maintenance. Although the power is switched off, the fans continue running and the after-heating coil stays hot for a while. -
Page 6: Use Of The Ventilation Unit
USE OF THE VENTILATION UNIT When the ventilation system has been carefully designed and installed, any actions from the users are seldom needed. The user can just relax and enjoy good ventilation. Button/display Description Mode display Current operation mode Temperature display Target temperature of the supply air Mode button... -
Page 7: Away Mode (1)
Away mode (1) NOTE: You can reduce ventilation when you are going to be If Boosted mode is controlled by pressing an away for an extended period of time, e.g., due to a trip. external button, the mode will remain on as long To select: as the button is activated. -
Page 8: Hood Mode
To go back to Home mode: NOTE: for 3 seconds. The text oFF will Press button The heater does not heat the supply air when the be displayed for a short period of time. Next, the outside temperature exceeds +25 °C. display will return to the basic view. -
Page 9: Efficient Use Of The Ventilation
If the structure of the ventilation system needs to be energy. updated, contact the designer of the system. • Use only spare parts approved by Enervent. • Use original filters only. They have been designed to ensure the best possible performance of your ventilation system. -
Page 10: Additional Functions
ADDITIONAL FUNCTIONS ADJUSTMENTS Service reminder display Supply air is too warm The purpose of the service reminder is to remind the user If the air coming from the ventilation system is too warm: when the service interval has elapsed. The maintenance interval is 4 or 6 months depending on the model. -
Page 11: Ventilation Is Noisy
Ventilation is not sufficient Indoor air is too humid If the ventilation is not sufficient: In addition to feeling the humidity, you may also identify a too high moisture content by listening to the sound 1. Check that the filters are clean and that they do not need to be replaced. -
Page 12: Maintenance
FOR YOUR INFORMATION In connection with conducting maintenance on any part of the equipment, always check the wear and cleanliness of other parts as well. Watch the maintenance instruction video in our Help Center on our website at www.enervent. com. -
Page 13: Replacing Filters, Left-Handed Model
Replacing filters, left-handed model ilmanvaihtolaite ventilation unit TYYPPI/TYPE: PINION EWIND E LEFT W/ V/ HZ / A: SRJ. NRO/SERIAL NO: IP 20 www.enervent.com 11 kg HEX 4 Ventilation unit operation and maintenance instructions... -
Page 14: Replacing Filters, Right-Handed Model
Replacing filters, right-handed model ilmanvaihtolaite ventilation unit TYYPPI/TYPE: PINION EWIND E RIGHT W/ V/ HZ / A: SRJ. NRO/SERIAL NO: IP 20 www.enervent.com 11 kg HEX 4... -
Page 15: Adding Water To The Water Trap (Removal Of The Condensation Water)
ADDING WATER TO THE WATER TRAP (REMOVAL OF THE CONDENSATION WATER) Left-handed model Right-handed model Ventilation unit operation and maintenance instructions... -
Page 16: Troubleshooting
The alarm is auto- company authorised by the matically reset manufacturer. when the fault is cleared. Other fault codes : Please contact an authorised maintenance company (refer to (Err, ----, oFFE, AL1, AL3, AL4, AL5, AL6, AL7, AL8) https://www.enervent.com/contact-information/?_ga=2.164480572.2024853575.1507015364-2052970745.1506576827) - Page 17 Ventilation unit operation and maintenance instructions...
- Page 19 Ventilation unit operation and maintenance instructions...
-
Page 20: User's Quick Guide
“F-PL”. F-PL will not be in use if a cooker hood is connected to the equipment. Enervent Oy Kipinätie 1 FIN-06150 Porvoo, Finland Tel. +358 207 528 800 Fax. +358 207 528 844 enervent@enervent.com...
Need help?
Do you have a question about the Pinion and is the answer not in the manual?
Questions and answers