Table of Contents
Advertisement
Wall Mount Fireplace
With Adjustable Mounting Bracket
*Patented Flame Technology & Front Venting Design
Model Number
JR42
JR50
JR60
JR72
READ & SAVE THESE INSTRUCTIONS
Carefully read and review before assembling, installing, operating, or maintaining
this product. Observe all safety instructions and information.
FAILURE TO FOLLOW WARNINGS & OPERATIONAL INSTRUCTIONS CONTAINED IN THIS
MANUAL CAN RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY
**IMPORTANT NOTICE**
For customer service & warranty issues, please contact: customercare@jrhome.com
08.16.16
Item Number
EF-WM353 MO (42")
EF-WM350 MO (50")
EF-WM349 MO (60")
EF-WM348 (72")
1
YEAR
limited
WARRANTY
Owner's Manual
Page 1
Advertisement
Table of Contents
Related Manuals for Paramount Fitness JR50
Summary of Contents for Paramount Fitness JR50
- Page 1 WARRANTY Owner’s Manual *Patented Flame Technology & Front Venting Design Model Number Item Number JR42 EF-WM353 MO (42”) JR50 EF-WM350 MO (50”) JR60 EF-WM349 MO (60”) JR72 EF-WM348 (72”) READ & SAVE THESE INSTRUCTIONS Carefully read and review before assembling, installing, operating, or maintaining this product.
- Page 2 Introduction WARNING • THIS APPLIANCE IS HOT WHEN OPERATED AND CAN CAUSE SEVERE BURNS IF CONTACTED. • Do not operate appliance before reading and understanding operating instructions. Failure to operate appliance according to operating instructions could cause fire or injury. • Risk of burns. Power to the appliance should be turned off and the appliance allowed to cool before servicing. To disconnect power to the appliance, turn controls to off, then remove plug from outlet.
-
Page 3: Listing Approvals
Dimensions FRONT VIEW SIDE VIEW TOP VIEW Listing Approvals This appliance has been tested in accordance with the CSA Standards for fixed and location-dedicated electric room appliances in the United States and Canada. If you need assistance during installation, please contact your local dealer. NOTE: This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA 70-latest edition in the United States or the Canadian Electric Code, CSA C22.1 in Canada. -
Page 4: General Instructions
General Instructions WARNING READ THESE INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION. FAILURE TO FOLLOW THEM COULD CAUSE AN APPLIANCE MALFUNCTION RESULTING IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. ALL ELECTRIC APPLIANCES HAVE HOT AND ARCING OR SPARKING PARTS INSIDE. DO NOT USE IT IN AREAS WHERE GASOLINE, PAINT OR FLAMMABLE LIQUIDS ARE PRESENT. -
Page 5: Hardware Parts List
Hardware Parts List A- Fireplace B- Side Brackets C1 - Top/Bottom Brackets C2 - Top/Bottom Brackets EF-WM353 MO (42”) x1 EF-WM353 MO (42”) x4 EF-WM349 MO (60”) x6 EF-WM349 MO (60”) x6 EF-WM350 MO (50”) x1 EF-WM350 MO (50”) x4 EF-WM348 (72”) x8 EF-WM348 (72”) x8 EF-WM349 MO (60”) x1... -
Page 6: Locating Appliance
Locating Appliance WARNING DUE TO HIGH TEMPERATURES, THIS ELECTRIC APPLIANCE SHOULD BE LOCATED OUT OF TRAFFIC. KEEP COMBUSTIBLE MATERIALS SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS, CLOTHES AND CURTAINS AT LEAST 36” FROM THE FRONT OF THE APPLIANCE. NEVER LOCATE THIS ELECTRIC APPLIANCE WHERE IT MAY FALL INTO A BATHTUB OR OTHER WATER CONTAINER. -
Page 7: Installation
Installation WARNING RISK OF FIRE! THE POWER CORD MUST NOT BE PINCHED AGAINST A SHARP EDGE. SECURE CORD TO AVOID TRIPPING OR SNAGGING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY. DO NOT RUN CORD UNDER CARPETING. DO NOT COVER CORD WITH THROW RUGS, RUNNERS OR THE LIKE. - Page 8 - Easy maintenence For installation instructions refer For installation For installation to Page 9 instructions refer instructions refer to Page 12 to Page 9 PARTS NEEDED C1 or C2 C1 or C2 (JR42/JR50: B only) (JR42/JR50: B only) Page 8 08.16.16...
-
Page 9: Front View
Option 1: Recessing the Appliance Flush into the Wall Due to the many different finish materials used on walls, it is highly recommended that you consult your local builder before you install this appliance in the wall. Select a location that is not prone to moisture and is located at least 36” (914mm) away from combustible materials such as curtain drapes, furniture, bedding, paper etc. 1. - Page 10 Positioning of Adjustible Builder’s Brackets B: Side brackets C1: Top bracket (Tall) Use for more security & surface area C2: Top bracket (Short) Used when no wall finish is applied. Will stay hidden behind glass. Builder’s bracket positions EF-WM353 MO, shown in grey for each model EF-WM350 MO EF-WM349 MO EF-WM348...
- Page 11 Minimum Clearance to Combustibles Measurements are taken from the glass front Sides, back and top 0” Framing Finishing Material (NON-LOAD BEARING) Item No. EF-WM353 MO 18.8” 36.10” EF-WM350 MO 18.8” 44.10” EF-WM349 MO 18.8” 54.10” EF-WM348 20.27” 66.10” Page 11 08.16.16...
- Page 12 Option 2: Hanging the Appliance on the Wall Due to the many different materials used on different walls, it is highly BODY recommended that you consult your local builder before you install this appliance on the wall. FRONT GLASS 1. Select a location that is not prone to moisture and is located at least 36”...
-
Page 13: Hard Wiring Installation
Hard Wiring Installation WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. HARD WIRING CONNECTION If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection, and wire the appliance directly to the house hold wiring. This appliance must be electrically connected and grounded in accordance with local codes, if hard wired. In the absence of local codes, use the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL CODE in the United States. -
Page 14: Wall Thermostat Installation
Wall Thermostat Installation WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. WALL THERMOSTAT INSIDE OUTSIDE BLACK BLACK THERMOSTAT BLACK BLACK NOTE: Wire the wall thermostat prior to installing the fireplace. WALL THERMOSTAT WIRING (24VAC) 1. - Page 15 Finishing Finishing WARNING POWER SUPPLY SERVICE MUST BE COMPLETED PRIOR TO FINISHING TO AVOID RECONSTRUCTION. HEAT VENTS AND AIR OPENINGS CANNOT BE COVERED IN ANY CIRCUMSTANCES. Front Glass Removal / Installation WARNING BEFORE THE FRONT GLASS IS INSTALLED OR REMOVED, UNPLUG THE APPLIANCE AND WAIT UNTIL APPLIANCE IS COOL TO THE TOUCH.
- Page 16 Crystal Embers Installation The glass front must be removed and the appliance must be secured in its final location before the crystal embers are installed. 1. Carefully place crystal embers into the bottom media tray on the front of the appliance as illustrated. Apply an even layer from side to side. Upgrade your fireplace by replacing your resin crystal embers with our real crystal Diamond Embers to give your unit the most exquisite and stylish look.
-
Page 17: Main Power Switch
Operating Instructions WARNING WHILE THE APPLIANCE IS OPERATING DO NOT REMOVE THE GLASS PANEL. THIS WILL CAUSE THE REMOTE CONTROL AND TOUCH PANEL TO DISFUNCTION. Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate. NOTE: Ensure the house circuit breakers for the power supply are turned on. - Page 18 Multi-functional Operating with Remote Control Turning ON/OFF the appliance: 1. Ensure steps 1-3 in the “Main Power Switch” procedure are first followed. 2. Press the “ ” remote button to turn on both flame and ember bed LEDs. 3. Press the “ ” button again to turn off both flame and ember bed LEDS. 4. Verify the lights are shut off. 5. Turn off the main power swtich. 6. Unplug the power cord. Note: The LEDs are at the brightest when the heating element is shut off. The power swtich on the appliance must be turned on for the remote control to operate.
-
Page 19: Remote Control Specifications
Remote Control Specifications 1. MCU Chips: SN8P2722 Chip 2. Software: LRC 12-02 3. Remote: 10 key remote 4. Item No.: EF-WM353 MO, EF-WM350 MO, EF-WM349 MO, EF-WM348 NOTE: Make sure your “AA” batteries (x2) are fully charged and installed correctly in your remote control before operating. -
Page 20: Wiring Diagram
Wiring Diagram WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. FIRE ELEMENT C N2 C N1 EMBER SHENGYI LRC16 FR-4 2014/09/18 POWER G C E BUTTON CORD BACKLIGHT 1... -
Page 21: Replacement Parts
LRC42 LRC42 LRC72 Circuit Board LED Backlights HWK42 HWK50 HWK50 HWK72 Hardware Kit CP42 CP42 CP42 CP42 Control Panel JR42 JR50 JR60 JR72 Wire Harness TH42 TH42 TH42 TH42 Thermostat RMOTER RMOTER RMOTER RMOTER Remote Control Receiver WCKIT WCKIT WCKIT... -
Page 22: Replacement Parts Diagram
Replacement Parts Diagram WARNING FAILURE TO POSITION THE PARTS IN ACCORDANCE WITH THIS MANUAL OR FAILURE TO USE ONLY PARTS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. NOTE: Care must be taken when removing and disposing of any broken glass or damaged components. Be sure to vacuum up any broken glass from inside the appliance before operation. -
Page 23: Troubleshooting
Troubleshooting WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. Symptom Problem Test Solution Dim or no flame/ LED’s are burnt out or Inspect the LED’s and replace them if necessary Ember bed is not glowing or malfunctioning dimming...