Instruction Labels - Billy Goat AE400H, AE450 Owner's Manual

INTENDED USE
INTENDED USE: This machine is designed for aerating established lawns and large grass covered areas. The
machine should not be used for any other purpose than that stated above.
DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn tine reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble
shooting section on page 14).

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT
equipment. Part numbers from the Illustrated Parts List are provided for convenience in ordering replacement labels. The correct position for
each label may be determined by referring to the part numbers shown.
LABEL WARNING GUARDS
P/N 900327
LABEL LIFT HERE
P/N 360187
ENGINE LABELS
BRIGGS
THROTTLE CONTROLS
Briggs and Stratton
Set lever to choke position when starting a cold engine
Set lever to desired engine speed. Move lever
completely to the left to stop engine
Part No 360251
AE Owner's Manual
®
Aerator. If any labels are damaged or missing, replace them before operating this
LABEL EXPLOSIVE FUEL
P/N 400268
LABEL INSTRUCTIONS AE
P/N 360262
LABEL PATENT
P/N 360286
Honda
Choke
Fuel valve
6
LABEL WARNING UNIT WEIGHT
P/N 360188
HONDA
Throttle
Form No F071206A