Table of Contents
Advertisement
4.6
Removing the compressor unit
1. First, disconnect the front door of the ground
source heat pump by unscrewing the top screws.
2. Disconnect the pipes from the connections
(valves VS1...VS4). NOTE! If you have to
disconnect the unit, ensure that the collector
pipes are insulated when the unit is reinstalled in
order to avoid condensation.
3. Open the screws of the compressor unit supports
and disconnect the compressor unit plugs from
the switchboard and the compressor unit.
Gebwell Qi Installation, operation, and maintenance manual
4. Pull the compressor unit out.
4.7
Hauling the compressor unit module
The compressor unit is equipped with loops for lifting.
Shafts can be used to lift up the compressor unit. By
threading the shafts through the loops, hauling the
compressor unit can be made easier.
The weight of the compressor unit:
Qi 6
96 kg
Qi 8
103 kg
Qi 10
104 kg
Qi 13
110 kg
11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
