Rear Panel - Sony KD-34XBR970 Operating Instructions Manual

Rear Panel

Jack
1 S VIDEO IN 1/3
2 VIDEO IN 1/3
VIDEO/L(MONO)
-AUDIO-R
3 DIGITAL AUDIO OUTPUT
(DOLBY DIGITAL PCM)
4 AUDIO OUT (VAR/FIX)
5 HD/DVD IN 4/5
(1080i/720p/480p/480i)
6 HDMI
(VIDEO 6 IN)
7 VHF/UHF
* Dolby and the double-D symbol are trademarks of Dolby Laboratories.
4
1
2
3
4
5
Description
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (2)
or VHF/UHF (7) connections.
Connect to the composite A/V output jacks on your VCR or other video
component. A third composite A/V input jack (VIDEO 2) is located on the front
panel of the TV. This video connection provides better picture quality than the
VHF/UHF (7) connection.
Connect to the Digital audio input of an audio component that is Dolby* Digital and
PCM compatible.
Connects to the left and right audio input jacks of your audio or video equipment.
You can use these outputs to listen to your TV's audio through your stereo system.
Connect to your DVD player's or digital set-top box's component video (YP
and audio (L/R) jacks. Component video provides better picture quality than 1,
2, or 7).
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped
audio/video component, such as a set-top box, DVD player, and A/V receiver.
HDMI supports enhanced, or high-definition video, plus two-channel digital audio.
RF input that connects to your VHF/UHF antenna or cable box.
DIGITAL DIGITAL
AUDIO AUDIO
OUT OUT
PCM/ PCM/
DOLBY DIGITAL DOLBY DIGITAL
6
7
P )
B R