Interference; Gsm/Wcdma Antenna Requirements - Huawei MU709s-2 Hardware Manual

HUAWEI MU709s-2p HSPA+ Mini PCIe Module
Hardware Guide

4.5.2 Interference

Besides the antenna performance, the interference on the user board also affects the
radio performance (especially the TIS) of the module. To guarantee high performance
of the module, the interference sources on the user board must be properly controlled.
On the user board, there are various interference sources, such as the LCD, CPU,
audio circuits, and power supply. All the interference sources emit interference signals
that affect the normal operation of the module. For example, the module sensitivity
can be decreased due to interference signals. Therefore, during the design, you need
to consider how to reduce the effects of interference sources on the module. You can
take the following measures: Use an LCD with optimized performance; shield the LCD
interference signals; shield the signal cable of the board; or design filter circuits.
Huawei is able to make technical suggestions on radio performance improvement of
the module.

4.5.3 GSM/WCDMA Antenna Requirements

The antenna for MU709s-2 module must fulfill the following requirements:
GSM/WCDMA Antenna Requirements
Frequency range
Bandwidth
Gain
Impedance
VSWR absolute max
VSWR recommended
Issue 0.1 (2014-06-03)
 The antenna consists of the antenna body and the relevant RF transmission cable. Take the
RF transmission cable into account when measuring any of the preceding antenna
indicators.
 Huawei cooperates with various famous antenna suppliers who are able to make
suggestions on antenna design, for example, Amphenol, Skycross, etc.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Depending on frequency band(s) provided by the network
operator, the customer must use the most suitable
antenna for that/those band(s)
70 MHz in GSM850
80 MHz in GSM900
170 MHz in DCS
140 MHz in PCS
80 MHz in WCDMA900 (35MHz for diversity antenna)
250 MHz in WCDMA2100 (60MHz for diversity antenna)
≤ 2.5 dBi
50 Ω
≤ 3:1
≤ 2:1
RF Specifications
30