Wake# Signal - Huawei MU709s-2 Hardware Manual

HUAWEI MU709s-2p HSPA+ Mini PCIe Module
Hardware Guide
Figure 3-3 Power off timing sequence

3.5 WAKE# Signal

WAKE# pin (signal that the module uses to wake up the host) supports software
control.
This signal is used for 3G module to wake up the host. It is designed as an OC gate,
so it should be pulled up by the host and it is active-low.
When the module wakes up the host, the WAKE# pin will output low-level-voltage to
wake the host.
Figure 3-4 Connections of the WAKE# pin
Issue 0.1 (2014-06-03)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description of the Application Interfaces
16