Receiving The Product; Transporting The Product; Unpacking; Scope Of Delivery - Grundfos AQtap Installation And Operating Instructions Manual

Power supply requirements
The AQtap can be used in the entire range
from 110 V up to and including 240 V.
• grid power AC
connection:
110 - 240 V, 50/60 Hz
Power supply
• solar panel DC voltage:
15 - 45 V / 3 A
Max. power 45 W
consumption
2.1.6 Disposing of the product
The batteries must be removed, before the
product is disposed of. The waste batteries
should be disposed of through the national
collective schemes.
Use appropriate waste collection services.
If this is not possible, contact the nearest
Grundfos company or service workshop.
6

3. Receiving the product

3.1 Transporting the product

Do not throw or drop the AQtap.
Grundfos accepts no liability for damage caused
Caution
by incorrect transportation or missing or
unsuitable packaging of the product!
• The AQtap is delivered in a cardboard box with protective
inserts. Keep the AQtap in the packaging during transport and
intermediate storage.
• Retain the packaging for future storage or return, or dispose of
the packaging in accordance with local regulations.
• Return the AQtap in its original packaging or equivalent.
3.1.1 Intermediate storage
• Keep the AQtap in its original packaging.
• Store indoors, protected from direct rain and sun.
• Permissible storage temperature: -10 °C to +50 °C.
• Permissible air humidity: max. relative humidity:
95 % (non-condensing).

3.2 Unpacking

Before installation, the following checks should be made:
1. Check that the AQtap has not been damaged during
transportation.
2. Check that the specifications of the AQtap correspond to the
order. See nameplate.
3. Check the scope of delivery.

3.3 Scope of delivery

3.3.1 AQtap
The AQtap scope of delivery comprises the following:
• AQtap unit
• 2 unique keys and 1 standard cabinet key
• mounting material (4 screws, 4 dowels, 4 tightening washers,
4 nuts)
• strainer
• galvanic separator
• AQtap water tapping guide
• AQtap installation and operating instructions
3.3.2 aqTOP
The aqTOP scope of delivery comprises the following:
• aqTOP unit
• 2 unique keys and 1 standard cabinet key
• mounting material (4 screws, 4 dowels, 4 tightening washers,
4 nuts)
• AQtap installation and operating instructions
3.3.3 Starter package
One starter package is created for each new Water Management
System group. The starter package, which is sent to the customer
directly, comprises the following:
• 2 activated AdminCards
• 1 activated ServiceCard
• AQtap installation guide
• AQtap Water Management System guide