Hardware Instruction - Sapido CS105x User Manual

Sapido Technology Inc.

1.2 Hardware Instruction

(1) Security Alarm（WDG71n）
Guide-light
WAN/LAN
Power Outlet
ZigBee/ Alarm
power Off Button
Network Mode
Switch
Reset Button
Connect to xDSL/Fiber, Static IP, Dynamic IP, PPTP, L2TP, Wi-Fi ISP AP,
WiFi-AP
Power supply 100V-240V
For ZigBee signal extend, it is also a button for turn on/off alarm manually
Please switch to the R mode while the RJ45 cable is connecting to the

xDSL modem and WDG71n
Please switch to A mode while RJ45 cable is connecting to Sapido router

and WDG71n.
Please switch to the W mode while connecting to Wi-Fi network by

Sapido router.
Please switch to the R mode while connecting to the network by other

brand routers.
Press over 10 seconds to factory default settings(like your Wi-Fi

password)
Press about 3 seconds, the device will be rebooted

8
Statue Instruction
www.sapido.com.tw