Table of Contents
Advertisement
Sapido Technology Inc.
Step 3. Please tear the double-sided tape and
paste on the back of Cloud Door & Window
Sensor (DDLA0z). Then paste the DDLA0z one
part on the frame of Window, and the other
part on the Window. The interval of both parts
is no longer than 1 cm. (You can also fasten the
DDLA0z by the attached fasteners.)
Step 5. Please open the lid of the Cloud Motion Sensor (MDKA0z) and insert 2 x AAA batteries.
Before close the lid, switch the power to ON.
Step 4. Please turn on the power. When the
ZigBee light is blinking, which means the
DDLA0z is mapping with alarm (WDG71n).
Once the Window is opened, the alarm will
start to have the alert sound.
13
www.sapido.com.tw
Advertisement
Table of Contents
