Table of Contents
Advertisement
Sapido Technology Inc.
Step 10. Switch your smart Switch to "W" network mode and Plug-in. Wait for 30 seconds to start
up. When Wireless/WPS
Plug in with the non-electronic control type of household appliances like below: One Switch for
one electric appliance only. No extension cord recommend in order to avoid heavy electric
tension.
Step 11. There are two ways to make WiFi connection with Smart Switch (WSG70n) based on
distance:
(1) Get started to make the WPS wireless (Wi-Fi) connection of Security Alarm (WDG71n) and
(2)
Smart Switch (WSG70n): Please press the WPS button on both Security Alarm Router
(WDG71n) and WSG70n separately. When both of the lights stop blinking, it means the
connection is completed.
Get started to make the WPS wireless (Wi-Fi) connection of IP Cam (IPJC2n) and Smart
Switch (WSG70n): Please press the WPS button on both Smart Switch (WSG70n) and
IPJC2n separately. When both of the lights stop blinking, it means the connection and
encryption are completed.
light turns to green, which means the start-up was successful.
15
www.sapido.com.tw
Advertisement
Table of Contents
