How To Connect Security System To The Existing Sapido Devices At Your Home; Wired Network Connecting- Transfer To Wireless Network Mode - Sapido CS105x User Manual

Sapido Technology Inc.

13. How to connect security system to the existing Sapido devices at your home?

If you already have Sapido router, there are two ways (wired & wireless) to connect Sensor Alarm Router
(WDG71n) to other Sapido devices at your home.

13.1 Wired network connecting- Transfer to wireless network mode

Step 1. Use the Ethernet Cable to hook up Sapido router and Sensor Router (WDG71n), and switch to the
A mode. Plug-in
※
To install Security Alarm Router(WDG71n) and Door & Window Sensor(DDLA0z), please reference 1.2
Hardware Installation instruction
Step 2.
ZigBee lights and Wireless lights
WAN/LAN light will turn red to green while starting up. About after 30 seconds, both
will turn on.
140
www.sapido.com.tw