Table of Contents
Advertisement
Sapido Technology Inc.
Step 9. Get started to make the WPS wireless (Wi-Fi) connection of Security Alarm (WDG71n) and
Smart Switch (WSG70n) if they are closer to each other: Please press the WPS button on both
Security Alarm Router (WDG71n) and WSG70n separately. When both of the lights stop blinking, it
means the connection is completed.
※
If it is closer to the IP Cam then make the WPS wireless (Wi-Fi) connection of IP Cam (IPJC2n)
and Smart Switch (WSG70n): Please press the WPS button on both Smart Switch (WSG70n)
and IPJC2n separately. When both of the lights stop blinking, it means the connection and
encryption are completed.
Step 10.
seconds, Wireless lights
WAN/LAN light will turn red to green while starting up. About after 30
will turn green, means that starting-up was successful.
152
www.sapido.com.tw
Advertisement
Table of Contents
