Table of Contents
Advertisement
Sapido Technology Inc.
Step 7. Start to WiFi bridge connect IP Camera (IPJC2n) to the existing Sapido router via WPS
(Wi-Fi): Please first press the WPS key of IPJC2n until the indicator blinks, and then press the
WPS key of Sapido router until the indicator blinks as well, after both indicators stop blinking,
the wireless connection is succeeded, and encryption is automatically done at the same time.
Step 8. Switch the Smart Switch to the W mode (Wi-Fi mode) and plug-in.
will turn red to green while starting up. About after 30 seconds, Wireless lights
turn green, means that starting-up was successful.
151
www.sapido.com.tw
WAN/LAN light
will
Advertisement
Table of Contents
