Symbols; List Of Symbols Used In The Manual - 3DGence ONE User Manual

There are many different filament materials. Consumables are usually made of substances such as: ABS, PLA, nylon with various
admixtures (e.g. tribo-filaments) nylon, elastic materials, enriched with metals, wood, chalk, carbon fiber, graphite and many
others. There are many types of materials such as changing colors, luminescent or made of plant fibers. The use of particular
material depends primarily on individual requirements and customer expectations - filaments have a variety of properties such
as esthetic, mechanical or temperature features. Any used material requires specific, precisely defined parameters for the
correct printing. Growing choice of new 3D printing materials makes FFF printing one of the most universal tools on the market.
3DGence ONE printer can use a wide range of printing materials available in many colours, if the material meets the following
criteria:
•
the diameter of the filament should be 1.75 mm, with a tolerance of +/- 0.05mm,
•
the suggested printing temperature should not exceed 265°C.
The Certified Material Base, available at www.3dgence.com, has been created for 3DGence ONE printer.
3DGence is not responsible for the quality of printouts made of the materials other than those included in the Certified Material
Base and for damage caused by the use of such materials as well as it does not provide support for the quality of the printouts
made of the filaments other than those included in the Certified Material Base.

3. SYMBOLS

3.1. List of symbols used in the manual

Throughout this User's Manual the following symbols are used. They identify the situations that are potentially dangerous to
health or may cause damage to the printer. Always adhere to the warning symbols. Negligence may cause the printer's damage
excluded from the guarantee cover as well as bodily injuries.
DANGER:
The situation or procedure described is potentially dangerous and it may result in damage to the printer or
cause injury to the operator. Exercise care.
ATTENTION:
The situation or procedure described is potentially dangerous and it may result in damage to the printer.
Exercise care.
PROTECTION:
Protective gloves, delivered with the printer, must be worn when performing the activities described. Put on
protective gloves before performing these activities.
3DGence ONE | version 07.2018
page 5 of 45