Table of Contents
Advertisement
2.1 First Time Use
Important Precautions and
Recommendations
After having unpacked the Technotape 3D oven, check to ensure
that it is not damaged. In case of doubt, do not use it and
consult your supplier or a professionally quali ed technician.
Packing elements (i.e. plastic bags, polystyrene foam, packing
straps, etc.) should not be left around.
• Do not attempt to modify the technical characteristics of the
appliance as this may become dangerous to use.
• Do not carry out cleaning or maintenance operations on the
appliance without having previously disconnected it from the
electric power supply.
• After use, ensure that the power switch is in the off position.
• During and after use of the appliance, certain parts will beco-
me very hot. Do not touch hot parts. Care should be taken to
avoid touching heating elements inside the oven.
2.2 Installation
Caution
• This oven must be installed in accordance with these installa-
tion instructions.
• This appliance is to be installed
only by an authorized person.
• This oven shall only be operated by trained personnel.
• Incorrect installation, for which the manufacturer accepts no
responsibility, may cause personal injury of damage.
• Always disconnect the oven from the power supply before
carrying out any maintenance operations or repairs.
INSTALLATION
Warning
When correctly installed, your product meets all safety require-
ments laid down for this type of product category.
Fire risk! Do not store ammable material in the oven. Always
use oven gloves when removing products from the oven whilst
hot. The manufacturer declines all liability for injury to persons
or damage to property caused by incorrect or improper use of
the appliance.
DO NOT lift the oven by the door handle.
Instructions
1. The oven must be connected to the power supply. Check that
the voltage corresponds to the value given in the rating plate
and that the electrical cable sections can withstand the load
speci ed on the plate. The plug must be connected to an
earthed socket in compliance with safety standards.
2. Switch the oven on with the main switch. No further assembly
is required.
3. Please continue to chapter 3 'Working with the 3D Sublimati-
on Oven'.
9
Advertisement
Table of Contents
