Basics; Making Calls - Sony SPP-ID975 Operating Instructions Manual

Basics

Making calls

(HOLD)
(*TONE)
(MUTING)
Additional tasks
To
Adjust the handset volume
Put a call on hold
Mute your voice
Switch to tone dialing
temporarily
20 US
Basics
VOL switch
(REDIAL)
Do this
Set the VOL switch to H (high), M (middle) or L
(low).
Press (HOLD). "HOLD" appears on the display.
Press (HOLD) again to resume the conversation.
Press (MUTING) to disable the microphone.
"MUTING" appears on the display. Press
(MUTING) again to cancel.
Press (*TONE) after you're connected.
The line will remain in tone dialing until
disconnected.
1
Pick up the handset from the
base phone.
2
Press (TALK) and wait until
"TALK" appears on the display.
The display also shows the
operation duration in hours,
minutes and seconds.
You will then hear a dial tone.
"HANDSET IN USE" appears
on the display of the base phone
and the LINE lamp on the base
phone lights up.
If "CHANNEL SEARCHING"
appears on the display, move
closer to the base phone.
3
Dial the phone number.
4
When you're done talking, press
(OFF) or replace the handset on
the base phone.
The display and the LINE lamp
on the base phone go off.