Sony SPP-A985 Operating Instructions Manual page 18

Step 4: Entering the area code (continued)
To enter the local area code (For 10 digits
phone numbers users)
If a call matches one of the local area codes you entered, the phone
number will be registered with 10 digits in the Caller ID list (area code
+ number). If a call does not match one of the local area codes you
entered, the phone number will be registered with 11 digits in the
Caller ID list (1 + area code + number). Some regions of the country
allow you to have more than one local area code. (Up to five local area
codes can be entered in this phone.)
1
Perform steps 1 to 3 on page 16.
2
Turn Jog Dial up to make "LOCAL" flash.
3
Press Jog Dial.
4
Select the number ("#1" to "#5") to enter the
local area code by turning Jog Dial.
5
Press Jog Dial.
"ENTER AREA CODE" appears on the
display.
6
Enter three digits of the local area code using the
dialing keys.
7
Press (PGM).
You will hear a long confirmation beep.
18 US
Getting Started
HOME LOCAL
#1 #2 #3 #4 #5