Sony SPP-A985 Operating Instructions Manual page 17

Notes
• If the home area code is already entered, it appears on the display in step 4.
To enter a different home area code, see "To change the home area code"
below.
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• You may press Jog Dial instead of (PGM) in step 6.
• To check the current home area code, perform steps 1 to 4. The home area
code appears on the display for about 20 seconds.
To change the home area code
1
Perform steps 1 to 4 on page 16.
The current home area code appears on the display.
2
Turn Jog Dial down to erase the current home area code.
3
Enter a new home area code using the dialing keys.
4
Press (PGM).
You will hear a long confirmation beep.
continued
US
17
Getting Started