Chapter 6 Operation And Procedure; Section 6.1. Start-Up Procedure; Section 6.2. Shut-Down Procedure - DSPM Defender Micro Maintenance Manual

6. OPERATION AND PROCEDURE
The initial startup must be done in conjunction with DSPM or by a factory authorized technician.
PLEASE CALL FOR STARTUP BEFORE APPLYING POWER TO THE UPS!
6.1. START-UP PROCEDURE
After making all power and grounding connections to the Emergency Lighting Inverter System;
verify that the system is OFF (Non of the LEDs are lit).
each of the following items takes place:
The fan come on.
The Processor perform a series of checks (These checks will be indicated by a delay in the
red LED extinguishing and the green LED illuminating (see Figure 4).
The unit is on the inverter.
6.2.
Press and hold the "Off/On switch" until the inverter beeps.
Title: Micro
Doc No.: 074-1000-02
Description: Emergency Lighting Inverter Maintenance Manual
until you hear a beep and release the button.
Rev: NR
erify that
Page#: - 28 -
1.877.377.6769
Date: 07/26/2016
Fax: 909.930.3335