Actegy Revitive Circulation Booster User Manual page 13

Instructions for use
k
Press the
desired level.
Use an intensity that provides you with strong but
comfortable muscle contractions and note that the
intensity required may vary from day to day - eg using
it on 25 one day, does not necessarily mean you will
need to use if at 25 the next day. The required
intensity could be higher or lower than previous usage.
It is normal to feel tingling or varying sensations in
your calf muscles.
If you feel pain or discomfort - lower the intensity of
the Body Pads using either the
the control panel of the device or on the remote control.
l The time control/display will start to count down in
minutes as REVITIVE cycles through its program.
m When REVITIVE times out, the time display
reads 00 and you will hear three beeps.
n
REVITIVE switches itself off automatically.
24
(+) Intensity Control until it is at the
R
(-) Intensity Control on
R
R
R
R
Important: the foot-pads will not produce a stimulation if the Body Pads
are plugged in.
o Ensuring that the device has switched itself off, then
gently peel the Body Pads from the skin.
Do not pull the Body Pads off the skin using the
Body Pad cords as this may damage the cords.
R
R
p Replace the Body Pads onto its plastic liner after use.
R
q Unplug the Body Pad cord from the opening
on REVITIVE.
You do not need to detach the Body Pads from the
Body Pad cords.
R
25