Actegy Revitive Circulation Booster User Manual page 10

Instructions for use
f
Set the time for REVITIVE. The default time is 30
minutes. You can set the timer for up to 60 minutes.
If you do not want to use the default time of 30 minutes,
set the time for the number of minutes you want.
You can use the controls on the control panel or on the
remote control.
Press the
Press the
NB It is recommended to use REVITIVE for
20-30 minutes per day.
Do not use REVITIVE more than 6 sessions of
30 minutes (or the equivalent) per day. This may
result in muscle fatigue.
g
Press the
start stimulation.
Continue to increase the intensity until you can feel or
see the muscles in your calves contract and relax. You
can set the intensity between 1-99.
You can use the buttons on the device or remote
control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
18
(+) Time Control to increase the time.
(–) Time Control to decrease the time.
(+) Intensity Control, one time, to
h Use an intensity that provides you with strong but
comfortable muscle contractions and note that the
intensity required may vary from day to day - eg using it
on 25 one day, does not necessarily mean you will need
to use if at 25 the next day. The required intensity could
be higher or lower than previous usage.
It is normal to feel tingling or varying sensations in your
calf muscles.
If you feel pain or discomfort:
• Remove one or both feet from the foot-pads to
stop the stimulation.
• Lower the intensity of the foot-pads using
the (–) Intensity Control on the control panel,
or remote control, before replacing your feet on
REVITIVE.
REVITIVE does not vibrate.
i The Time Display will start to count down in
minutes as REVITIVE cycles through its program.
j When REVITIVE times out, the
and you will hear three beeps.
k
The REVITIVE switches itself off automatically.
Time Display reads 00
19