Actegy Revitive Circulation Booster User Manual page 12

Instructions for use
d Attach the ends of the Body Pads to the Body Pad
Cord.
Press connectors until no gap is between them.
Leaving a gap may cause discomfort.
e
Plug the other end of the Body Pad cord into the
opening on the side of REVITIVE.
Plugging in the Body Pad cord will automatically
turn the foot-pads off.
R
f Remove the plastic liner from the Body Pads, by
peeling it off carefully. Replace the Body Pads onto
the plastic liner after use.
R
g Press the Body Pads on the area you wish to apply
electrical stimulation to, as shown on page 19, gently
R
pressing the adhesive side against the skin.
R
22
R
R
R
R
R
h Press the power button on the device or on the
remote control to turn REVITIVE on.
R
R You will hear a beep and the display lights will light up.
The
read 00.
To switch off the REVITIVE unit at any time during
operation, simply press the power ON/OFF button.
i Set the time for the number of minutes you want to
use REVITIVE. The default time is 30 minutes.
You can set the timer for up to 60 minutes.
You can use the buttons on the control panel or
remote control.
Press the
Press the
NB It is recommended to use REVITIVE for
20-30 minutes per day.
Do not use REVITIVE more than 6 sessions of
30 minutes (or the equivalent) per day. This may
result in muscle fatigue.
j Press the
start stimulation.
Continue to increase the intensity until you can feel or
see the muscles in contract and relax. You can set the
intensity between 1-99.
You can use the buttons on the device or remote
control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
time will read 30 minutes and Intensity will
(+) Time Contol to increase the time.
(-) Time Contol to decrease the time.
(+) Intensity Control, one time, to
23