Replacing The Power Button With Fingerprint Reader; Procedure - Dell Inspiron 3480 Service Manual

Identifier
Status
Replacing the power button with fingerprint
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.
Identifier
Status

Procedure

1 Using the alignment posts, align and place the power button on the palm rest and keyboard assembly.
2 Place the power-button with fingerprint-reader board onto the slot on the palm rest and keyboard assembly.
3 Adhere the fingerprint reader cable on the palm rest and keyboard assembly.
88

Replacing the power button with fingerprint reader

GUID-0C3EE813-46D4-4A46-9435-5A8AE8783F68
Released
computer. After working inside your computer, follow the instructions in
GUID-53F119EC-28A7-48F7-943E-D560FCFAD344
Released
37
reader
After working inside
www.dell.com/