Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Loosen the three captive screws on the base cover.
2
Remove the six screws (M2.5x4) that secure the base cover to the palm-rest and keyboard assembly.
3
Pry the base cover from the top-right corner of the palm-rest and keyboard assembly.
4
Lift the base cover off the palm-rest and keyboard assembly from the right side of the base cover.
GUID-98068FC2-1C1C-46DE-B3FA-DF9D488E9BA1
Released
computer. After working inside your computer, follow the instructions in
GUID-ABB1E676-BFCA-4C1B-A788-028C4112ACC0
Released
Removing the base cover
After working inside
www.dell.com/
Removing the base cover
6
17