Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.
2
Insert the tabs on the display-hinge cover to the slots on the display back-cover and antenna assembly.
3
Snap the display-hinge cover into place.
GUID-619F529E-294B-4F0D-BB9D-9B71EB448811
Released
Replacing the display bezel
computer. After working inside your computer, follow the instructions in
GUID-7A0CC384-554A-44B7-BF61-ADFDF2303835
Released
43
After working inside
www.dell.com/
Replacing the display bezel
101