Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 3480 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
Identifier
Status

Procedure

1 Note the routing of the antenna cables and peel off the cables from the system board.
2 Open the latch and disconnect the display cable from the system board.
3 Remove the display cable from the routing guides on the palm-rest and keyboard assembly.
4 Remove the four screws (M2.5x4) that secure the left and right hinges to the system board and I/O board.
68

Removing the display assembly

GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Released
Removing the display assembly
computer. After working inside your computer, follow the instructions in
GUID-2F418431-DC89-4092-932D-7ADCE3D6EC3A
Released
GUID-FA1DE748-9C76-49B1-A0FE-68276D6D5D1F
Released
30
After working inside
www.dell.com/