Step 2: Connect The Power Cord; Step 3: Secure The Cords And Close The - Sony SDM-S51R Operating Instructions (primary manual) Operating Instructions Manual

Step 2: Connect the power cord

With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
to a power outlet
power cord (supplied)
This illustration of monitor rear is the SDM-S51R.
The same applies for the SDM-S71R/S81R model.
8
to AC IN
OPEN
Step 3: Secure the cords and close
the back cover
1
Remove the cable holder.
Illustrations of monitor rear are the SDM-S51R.
The same applies for the SDM-S71R/S81R model.
2
Secure the cables and cords with the cable holder.
To close the back cover securely, bundle the cables and cords
as illustrated.
3
Close the back cover.
Bandle the cables and cords
You can bandle the cables and cords by using the supplied cord
strap.
Cable holder
Cable
holder
Cord strap