Sony SDM-S51R Operating Instructions (primary manual) Operating Instructions Manual page 19

Tft lcd color computer display
Hide thumbs Also See for SDM-S51R Operating Instructions (primary manual):
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Symptom
Picture is fuzzy
Picture is ghosting
Picture is not centered or sized
properly
Picture is too small
The picture is dark
Wavy or elliptical pattern (moire)
is visible
Color is not uniform
White does not look white
Monitor buttons do not operate
(
appears on the screen)
The monitor turns off after a while
Displaying this monitor's name, serial number,
and date of manufacture.
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds.
The monitor's information box appears. Press the MENU button
again to make the box disappear.
MENU
Example
INFORMATION
MODEL : SDM-S51R
SER NO : 1234567
MANUFACTURED : 2002-40
Check these items
• Adjust the brightness and contrast (page 11).
• Adjust the pitch and phase (page 12).
xProblems caused by the connected computer or other equipment
• Set the resolution to XGA (1024 × 768) on your computer (SDM-S51R).
• Set the resolution to SXGA (1280 × 1024) on your computer (SDM-S71R/S81R).
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Adjust the pitch and phase (page 12).
• Adjust the picture position (page 12). Note that some video modes do not fill the screen to
the edges.
xProblems caused by the connected computer or other equipment
• Set the computer's resolution to the screen's resolution.
• Adjust the brightness (page 11).
• Adjust the backlight (page 14).
• It takes a few minutes for the display to become bright after turning on the monitor.
• Adjust the pitch and phase (page 12).
• Adjust the pitch and phase (page 12).
• Adjust the color temperature (page 13).
• If the menu lock is set to ON, set it to OFF (page 15).
• Set the power saving function to OFF (page 14).
xProblems caused by the connected computer or other equipment
• Set the computer's power saving setting to off.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-S51R or SDM-S71R or SDM-S81R
• Serial number
• Name and specifications of your computer and graphics board.
Model name
Serial number
Week and year
of manufacture
GB
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdm-s51r/bSdm-s71rSdm-s71r/bSdm-s81rSdm-s81r/b

Table of Contents