Windows Taskbar Auto-Hide Feature - Keysight Technologies X-Series Getting Started Manual

Using Windows Tools
Windows Shortcuts and Miscellaneous Tasks

Windows taskbar auto-hide feature

The Windows taskbar should always be in the auto-hide mode when using the
instrument application. If the taskbar is not set to auto-hide, the lower part of
the instrument display is obscured by the taskbar.
If a mouse is attached to the instrument, and you move the mouse cursor to
the bottom of the display (either deliberately or accidentally), the taskbar
automatically appears. Provided that the taskbar is in auto-hide mode, you can
make it disappear again by moving the mouse cursor away from the bottom of
the screen.
If at any time the Windows taskbar is inadvertently set to the non-auto-hide
mode, you can restore the auto-hide behavior by doing the following:
Step
1. Click
2. Click
3. Click the
4. Select the
5. Click
X-Series EMI Receiver Getting Started Guide
Start Control Panel
>
Taskbar and Start Menu
Taskbar
tab
Auto-hide the taskbar
check box
OK
.
Notes
Ctrl
If not using a mouse, press
If you are not using a mouse, use the
shortcut key combinations specified in the
"Windows shortcuts (key
Section
combinations)" on page 93
these selections.
The Taskbar and Start Menu Properties
dialog appears.
If you are not using a mouse, press
repeatedly until the auto-hide option is
Select
selected, then press
check box state.
This applies the change and closes the
dialog box.
Esc.
+
to make
Tab
to toggle the
95