Table of Contents
Advertisement
Image 2-3
2.
Connect the USB upstream connector to a PC USB host to make use of QAWeb or any of the display USB
downstream connectors (e.g. to connect a keyboard, mouse or other peripheral).
Image 2-4
3.
Connect the mains power input to a grounded power outlet.
Image 2-5
4.
If necessary for your application, earth the Nio Color 2MP 23" by connecting the earth pin to a grounded outlet
by means of a yellow/green AWG18 wire (maximum admitted cable length according to national regulation
requirements).
Image 2-6
5.
Route all cables through the provided cable routing clip at the back of the display stand.
Installation
K5902134 /04
Nio Color 2MP 23"
11
Advertisement
Table of Contents
