Installation
2.1 Stand base plate mounting
To mount the stand base plate
1.
Put the display face down on a clean and soft surface. Be careful not to damage the panel.
2.
Rotate the stand pillar 90° counterclockwise.
Image 2-1
3.
Attach the stand base plate to the pillar by fixing the dedicated screw as shown below.
Image 2-2
2.2 Cable connections
To connect the cables
1.
Connect one or more video source(s) to the corresponding video inputs. Use the appropriate video cable(s) to
do this.
The input source to be displayed can be selected in the OSD menus (see "Input source selection", page 17).
10
K5902134 /04
Nio Color 2MP 23"