Table of Contents
Advertisement
An example of a custom Print Quality Report is shown below. Notice that each color has the printhead
dies numbered for easier diagnosis. In addition, a custom color has been added.
Figure 4. NeuraLabel 300x Custom Print Quality Report
Built-in PageWide Quality Tools
The NeuraLabel 300x does contain a set of automatic routines that correct many quality issues. These
routines are built in to the three levels of printhead cleaning, accessible through the printer's operator
panel. The need for Toolbox arose because of specific shortcomings in these automatic routines. These
routines, however are still applicable and often very useful. For any printer with severe quality issues, a
practical approach would be to run the printer's automatic routines first, and then follow this up with a
fine tuning using the Toolbox application. For specific easily identifiable quality issues, Toolbox can be
immediately used to resolve the quality problem.
3
Advertisement
Table of Contents
