Sony PVM-740 Operating Instructions Manual page 8

Input signal waveform and audio level display
The waveform of the input signal or the audio level
(embedded audio only) can be displayed.
For more information, see SUB INPUT SELECT of
"WFM/ALM (waveform monitor and audio level meter)
DISPLAY SETTING" on page 21.
Screen saver
To reduce burn-in, the brightness of the screen can be
automatically decreased when a still image is displayed
for more than 10 minutes.
Silent mode
You can stop the built-in cooling fan. This function is
convenient for stopping the noise of the fan rotation.
Flip HV
The image can be flipped vertically, horizontally, or
vertically and horizontally with no signal interruption.
For more information, see FLIP HV of "FUNCTION
BUTTON SETTING" on page 23.
Rack mount monitors
Using the optional MB-531 Mounting Bracket, up to
two monitors may be mounted on the EIA-standard 19-
inch rack. A height of 4U space-saving design allows
more equipment to be installed in tight space, such as an
outdoor broadcasting van.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. Up to 32
monitors and control units (max. 4) can be connected by
the Ethernet (10BASE-T/100BASE-TX) connection
and controlled remotely on the network. You can
control individual monitors or monitor groups simply by
entering the monitor ID or group ID number. You can
also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
For more information, see SERIAL REMOTE of
REMOTE menu on page 25.
Refer to the Operation Manual of the BKM-15R Monitor
Control Unit.
Select color temperature mode
You can select the color temperature from among two
settings (9300 K, 6500 K).
Auto chroma/phase function
The chroma and phase of the decoder are automatically
adjusted with the auto chroma/phase function.
8
Features
Blue only mode
In the blue only mode, a monochrome display is
obtained with all three of the R/G/B picture elements
driven with a blue signal. This mode is convenient for
chroma and phase adjustments and monitoring of signal
noise.
H/V delay mode
The horizontal and vertical sync signals can be
monitored simultaneously.
Select marker/scan display
Various items for broadcast use can be displayed.
The center marker, aspect marker or display size (scan),
etc are displayed by selecting according to use.
For more information, see "MARKER SETTING" on
page 21 and SCAN of "FUNCTION BUTTON
SETTING" on page 22.
Scan setting/native display
When video signals are input, you can set the display
size to 0% scan (normal) or 5% over scan (over).
A native display function that maps the pixel of the
signal to the panel in one-to-one mode is also equipped.
With this, scaling to correct the screen aspect ratio is
done to the horizontal direction of SD signals with non-
square pixels (number of horizontal pixels of the signal
system is 720 or 1440) or 640 × 480 SD signal of HDMI
video.
On-screen menus
You can set the appropriate settings according to the
connected system by using the on-screen menus.
Select language display
You can select from seven display languages, English,
French, German, Spanish, Italian, Japanese and
Chinese.
Key inhibit function
You can inhibit a key function to prevent misoperation.
Monaural speaker
The monitor has a monaural speaker to reproduce sound.