Adjusting And Changing The Settings; Status Menu; Color Temp/Bal Menu; User Control Menu - Sony LMD-2030W Operating Instructions Manual

Adjusting and Changing the
Settings

STATUS menu

The STATUS menu is used to display the current status of the unit.
The following items are displayed:
S TAT U S ( 1 / 2 ) R r
F O R M AT
xxxxxxxx
C O L O R T E M P
G A M M A
C O M P L E V E L
N T S C S E T U P
R G B / C O M P S E L
S C A N M O D E
S TAT U S ( 2 / 2 ) R r
D I S P L AY
L M D - 2 0 3 0 W
O P T I O N
B K M - 3 2 0 D
• Signal format
• Color temperature
• Gamma
• Component level
• NTSC setup
• RGB/Component select
• Scan mode
• Display
• Option

COLOR TEMP/BAL menu

The COLOR TEMP/BAL menu is used for adjusting the picture
white balance.
You need to use the measurement instrument to adjust the white
balance.
Recommended: Konica Minolta color analyzer CA-210
C O L O R T E M P / B A L
xC O L O R T E M P
M A N U A L A D J
· A D J U S T G A I N · · ·
· A D J U S T B I A S · · ·
· C O P Y F R O M
Submenu Setting
COLOR TEMP Select the color temperature from among
"HIGH", "LOW" and "USER" setting.
xxxxx
xxxx
x
xxxxx
xx
xxxx
xxxx
xxxx
xxx
Submenu Setting
MANUAL ADJ If you set the COLOR TEMP to "USER"
setting, the item displayed is changed from blue
to white, which means you can adjust the color
temperature.
• ADJUST GAIN...: Adjusts the color
balance (GAIN).
• ADJUST BIAS...: Adjusts the color
balance (BIAS).
• COPY FROM: If you select "HIGH" or
"LOW", the white balance data for the
selected color temperature will be
copied in the "USER" setting.

USER CONTROL menu

The USER CONTROL menu is used for adjusting the picture.
Items that cannot be adjusted depending on the input signal are
displayed in blue.
U S E R C O N T R O L
C O N T R O L
xC O N T R A S T
· B R I G H T
· C H R O M A
· P H A S E
· A P E R T U R E
· B A C K L I G H T
Submenu Setting
CONTROL You can adjust the picture.
• CONTRAST: Adjusts the picture contrast.
• BRIGHT: Adjusts the picture brightness.
• CHROMA: Adjusts color intensity. The
higher the setting, the greater the
intensity. The lower the setting, the lower
the intensity.
• PHASE: Adjusts color tones. The higher the
setting, the more greenish the picture. The
lower the setting, the more purplish the
picture.
• APERTURE: Adjusts the picture sharpness.
The higher the setting, the sharper the
picture.
• BACKLIGHT: Adjusts the backlight. The
brightness of the backlight changes when
the setting changes.
For details of input signals and adjustable/setting items, see page 9.

USER CONFIG menu

You can select a language, etc.
Items that cannot be adjusted depending on the input signal are
displayed in blue.
x
x
x
x
xxx
x
Adjustment Using the Menus
17