Honeywell RABO Instruction Manual page 13

ELSTER RABO Rotary Gas Meter
®
iv) Unscrew the lock nut from the magnet holder
(THREADS ARE LEFT HAND) [Figure 17].
LOCK
NUT
CHANGE
GEAR
MAGNET
HOLDER
Figure 22. Magnet holder, change gear, and lock nut
v) Unscrew the change gear from the magnet holder
(THREADS ARE LEFT HAND) [Figure 22].
vi) Assemble the change gear to the ID magnet holder
(THREADS ARE LEFT HAND).
(1) For 3.5M meters
(a) Apply Loctite 770 primer to the threads and mating
®
surfaces of the change gear and the magnet holder
[Figure 23]. Allow to dry for 30 seconds.
13 Honeywell