Vemer Mithos Color Wi-Fi User Manual page 43

• Assembly
Mithos color Wi-Fi is designed for wall installation or box 503 coverage.
1) Unhook the chronothermostat base and fix it to the wall using the supplied screws.
2) Connect the cables of the power supply, of the relay and of the contact or of the
external probe (if present) in accordance with the diagram of page 42.
3) Hang the chronothermostat to the base and mount the cover on the chronothermostat
(if necessary).
Base
• Positioning
Place the chronothermostat in an area that mirrors, as much as possible, the conditions of
average temperature of the entire environment.
Avoid installing the chronothermostat too close to doors, windows,heat sources, behind
curtains and positions with excess or total lack of air inlet.
It is advised to install the chronothermostat at about 1.50 m from the floor.
ASSEMBLY AND POSITIONING
Screws Chronothermostat
- 41 -
Mithos color Wi-Fi Chronothermostat User Manual
Cover