About - Motion DMD870 User Manual

DMD870 Digital Stepper Drive
OverCurrent: Over-current Protection. Protection will be activated when continuous
current exceeds 16A.
OverVoltage: Over-voltage Protection. When power supply voltage exceeds 91±1 VDC,
protection will be activated.
PhaseErr: Phase Error Protection. Motor power lines wrong & not connected will activate
this protection.
ErrCounter: Displays current error(s) and current error history.
Erase Current Err!: Erase Current Err button. The user can clear current error(s) by clicking
this button.
Erase All!: Erase All! button. The user can clear all error(s) including error history by
clicking this button.

About

The user can choose two drop-down menus by clicking "About", including Product
Information and Contact Us.

Product Information window: Shows some product information about ProTuner.

Contact Us window: Shows the contact information.
Motion Control Products Ltd.
User's Manual
Figure 18: Error check window
P a g e | 2 9 www.motioncontrolproduts.com