Menu Load (Load Mode Settings) - opti-solar SC-Max series User Manual

7.5 Menu Load (Load mode settings)

We can set load mode and time in this menu (Figure 5: Load mode), press the OK button to enter this menu.
Load mode settings: Press the OK button to enter the menu, and press ▲ ▼ to change the
Load control
load mode.
AUTO
Possibilities for programming: "Auto", "Standard", "Timer" (Default: Auto).
Auto: Dusk to dawn mode
Standard: Load on mode
Timer: Double time mode
The time delay of load open settings: Press the OK button to enter the menu, press ▲ ▼ to
change the value.
The solar charge controller can control night lighting automatically by evaluating the density
Light on delay
of outside light with the help of the solar PV module array. Depending on the PV array
00:00
alignment or shading, it may well be that night recognition is activated even though twilight
has not yet come to an end. By the programmable time adjustment "Light on delay", the
night light switch-on may be shifted to a later time.
Possibilities for programming: 00:00~02:00 (Interval 5min, Default: 00:00)
The delay time of load close settings: Press the OK button to enter the menu, press ▲ ▼
Light off delay
to change the value.
00:00
After setting "Light off delay" the light can remain on a period of time after dawn.
Possibilities for programming: 00:00~02:00 (Interval 5min, Default: 00:00).
Note: When the controller is set to "Standard", "Light on delay" and "Light off delay" have no effect on it, but
when the controller is set to "Auto" and "Timer", the delay time settings work.
Day/Night threshold
Sunset
Light on
Light off
Day/Night threshold
Sunset
Night timer1
Light on
Light off Light off
Figure5: Load mode
Page8/13 Pages
Day/Night threshold
Dusk to dawn
Day/Night threshold
Night timer2
Light on
Sunrise
Light off
Sunrise
Light off