Improper Device Modifications; Requirements For Special Applications - Siemens SITRANS LR250 Compact Operating Instructions

Pressure equipment direc‐
tive PED
2014/68/EU
RED
2014/53/EU
The applicable directives can be found in the EC conformity declaration of the specific device.
2.2

Improper device modifications

Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
● Only carry out modifications that are described in the instructions for the device. Failure
2.3

Requirements for special applications

Due to the large number of possible applications, each detail of the described device versions
for each possible scenario during commissioning, operation, maintenance or operation in
systems cannot be considered in the instructions. If you need additional information not
covered by these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
LR250 (mA/HART)
Compact Operating Instructions, 06/2018, A5E33469191-AB
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
2.3 Requirements for special applications
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of pressure equipment
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of radio equipment and repealing
Directive 1999/5/EC
Safety information
11