Inserting A Disc - Sony PDW-D1 Operation Manual

Switch settings
Before beginning playback, make the
following switch settings.
~/1 (on/standby) switch (page 27): ~
position
Settings
In the PC operation settings dialog box of
the utility software (see page 48), set the
following items.
Login: "Inhibit" (Disables FAM
connection.)
In the setup menu of the utility software
(see page 50), set the following items as
required.
PREROLL TIME: Set the preroll time.
(0 to 30 seconds)
DV AUDIO OUTPUT SELECT: Select
the audio signals to assign audio output
channels.
•CH1/CH2 (TR-1/TR-2, TR-3/TR-4,
TR-5/TR-6, TR-7/TR-8)
•CH3/CH4 (TR-1/TR-2, TR-3/TR-4,
TR-5/TR-6, TR-7/TR-8)
DV OUT AUDIO MODE: Select the
audio mode for audio output. (4ch
(32 kHz/12 bit)/ 2ch (48 kHz/16 bit))
525/625 SYSTEM SELECT: Select the
line mode. (525/625)
STORED OWNERSHIP: Set UMID
ownership information (country code,
organization code and user code)
Notes
• When playing back a disc recorded in
MPEG IMX format, data is output after
being converted into DVCAM format.
• This unit does not support clip list
playback and saving the playback
position.

Inserting a disc

Insert a disc into this unit (see page 36).
For details of playback operations, refer to the
manual provided with the editing software to be
used.
3-6 Preparations for Recording and Playback 39