Setup Menu - Sony PDW-D1 Operation Manual

Item name
Operation
Hours (r)
Laser
Parameter (r)
Seek
Running
Hours (r)
Spindle
Running
Hours (r)
Loading
Counter (r)
a) This can be used as a guide in determining
when to replace parts.
To refresh the display
Click the Refresh button.
Version information
The firmware version information includes
the following items.
Item name
Package
SY
PIER
CAVE
Drive
DSP
50 5-3 Details of Functions
Display contents
Same as Operation
a)
Hours (resettable )
The cumulative light
output time for the optical
a)
head (resettable )
The cumulative seek
operation time for the
optical head (unit: hours,
a)
resettable )
The cumulative spindle
rotation time (unit: hours,
a)
resettable )
The total number of times
disc has been loaded
a)
(resettable )
Display contents
The package version
when the firmware was
downloaded as a
package
System control software
version
"PIER" version of FPGA
"CAVE" version of
FPGA
Optical disc drive
system control software
version
Audio DSP software
version
Alarm log
This shows a maximum of 50 alarms
generated since the unit was last powered
on.
Select an item in the list to display details of
that alarm (date and time of generation, and
location on disc (time code)).
When the limit of 50 items on the list is
exceeded, older alarms are deleted.
Powering off the unit deletes all items from
the list.
Refer to the utility software help for information
about list of alarms.

5-3-2 Setup Menu

AV settings
Set the following items relating to this unit.
In the Settings column of the table,
underlined values indicate the factory
default settings.
OPERATIONAL FUNCTION
Item name Settings
PREROLL 0 SEC to 5 SEC to 30
TIME SEC: Set the
preroll time to
between 0 and 30
seconds in steps of
1 second. A preroll
time of at least 5
seconds is
recommended
when using this unit
for editing.